Need Help? Ask Our Eco Advisors
ChemLink, NovaLink FP, Flashing & Patching Compound (BARR Flash and Patch)-
ChemLink, NovaLink FP, Flashing & Patching Compound (BARR Flash and Patch)
ChemLink, NovaLink FP, Flashing & Patching Compound (BARR Flash and Patch)
ChemLink, NovaLink FP, Flashing & Patching Compound (BARR Flash and Patch)
Item #3417
Model #F1107
$7.16
Shipping calculated at checkout.
Non-toxic roofing, chimney and flashing sealant
NovaLink FP (formerly known as BARR Flash and Patch) is a non-toxic, moisture-cured, elastomeric caulk/sealant designed specifically to waterproof and repair all types of residential and commercial roofing. Elastomeric means it will stretch and shrink with the seasons. Flash and Patch performs well on chimney seals, asphalt shingles, roof valleys, seams and flashing.
This liquid rubber comes in a black gloss and is able to work in cold conditions as low as 40 °F, as well as in wet conditions; this makes it great for temporary emergency repairs. NovaLink FP will not degrade from exposure to sunlight.
NOTE: We recommend using this product within 6 months of the date of purchase.
NOTE: This caulk will not bond to HDPE plastics.
NovaLink FP applies as black and dries to a black gloss.
NOTE: ChemLink products do not adhere to polyethylene or polypropylene (recycled plastics)
Why We Like It
NovaLink FP (formerly known as BARR Flash and Patch) will last a very long time without cracking or shrinking and it won't smell like solvent or petroleum-based products. When you have serious roofing problems, being able to apply this type of material in cold wet conditions is a big plus.
Features & benefits
- Weather-tight elastomeric seal — designed for joints that expand and contract, comes in a gloss black color
- Quick-setting — tack-free and rain-ready in 30 minutes
- Emergency-friendly — designed to quickly and easily fix gaps and cracks
- Versatile — applies vertically and overhead; for interior or exterior use
- Non-toxic — solvent-free; no formaldehyde, no latex or hazardous substances
- Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
- Eco-friendly — low VOC
- Easy-to-use — water cleanup; paintable in 24 hours
Specs
Dimensions
Weight per Sale Unit
1.05 lbs
Coverage
25 linear feet with a 1/4" bead
Recommended # of Coats
1
Re-coat After
As needed
Basics
Interior or Exterior
Exterior,
Interior,
Use On
Above grade waterproofing
Asphalt: shingles
Below grade waterproofing
Between slab waterproofing
Chimneys
Concrete transition joints
Concrete: painted
Concrete: sealed
Concrete: unsealed
Flashing
Foundations: above grade
Foundations: below grade
Gutters
Horizontal joint sealer
Lining condensation pans
Lining gutters
Masonry: porous
Masonry: unsealed
Planter boxes
Saunas
Sealing cracks: concrete or asphalt
Sealing parapets
Showers
Stone: porous
Stone: unsealed
Temperatures: high or low
Tile: wall
Valleys
Asphalt: shingles
Below grade waterproofing
Between slab waterproofing
Chimneys
Concrete transition joints
Concrete: painted
Concrete: sealed
Concrete: unsealed
Flashing
Foundations: above grade
Foundations: below grade
Gutters
Horizontal joint sealer
Lining condensation pans
Lining gutters
Masonry: porous
Masonry: unsealed
Planter boxes
Saunas
Sealing cracks: concrete or asphalt
Sealing parapets
Showers
Stone: porous
Stone: unsealed
Temperatures: high or low
Tile: wall
Valleys
Surface or Product Preparation
Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer. In most instances BARR will not require a primer. However, certain applications or substrates may require a primer to ensure a long lasting bond and weatherproof seal. It is the applicators responsibility to determine the need for a primer. Chem Link recommends a primer be used for any application where prolonged immersion is anticipated.
Application Method
Caulk gun
See manufacturers guidelines for each type of surface
See manufacturers guidelines for each type of surface
Application Temperature Range
Warmer than 40°F
Location
Roofs,
Eco-replacement for
Caulk or Caulking Compound,
Roofing Sealers,
Shelf Life
1 Year
Storage
Store in cool dry place out of sunlight
Chemically-sensitive safe
Test before use
Yes, test on inconspicuous area
Certifications
Certifications
- Meets or exceeds California Air Resources Board (CARB) requirements
- Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements
- Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements
- Meets or exceeds Californial Proposition 65 requirements
- Meets or exceeds OTC requirements for sealants & caulks
- Meets or exceeds USDA requirements for non-food contact
LEED Qualifications
- Indoor Environmental Quality/4.1 Low-Emitting Materials/Adhesives and Sealants: 1 point
Features
Material Origin
United States,
Country of Manufacture
United States,
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations. Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Cleans Up With
Alcohol
Paint Finish Type
- Caulk
- Sealer
VOC Content
32.0 grams/liter
Drying Time
Skins over in 50 minutes
Freeze/thaw Safe
Yes
Appearance When Dry
black gloss
Formaldehyde Emissions
No added urea formaldehyde
Finish
Caulk,
Sealer,
Questions & Answers