Need Help? Ask Our Eco Advisors
-
ChemLink, Clear Polyether Sealant, 10.1-Ounce -
ChemLink, Clear Polyether Sealant, 10.1-Ounce
ChemLink, Clear Polyether Sealant, 10.1-Ounce
ChemLink, Clear Polyether Sealant, 10.1-Ounce
Item #3326
Model #F1212
$17.33
Shipping calculated at checkout.
Better than silicone
Clear is a non-toxic, ultra-low odor, elastomeric caulk and sealant for indoor or outdoor use (-40 °F to 200 °F) that outperforms most urethanes and silicones. Clear is moisture-cured, making it perfect for tough job-site conditions that are very dry or damp; it's also good in cold climates as it can be applied at temperatures as low as 30 °F. Use on wood, metal, glass, EIFS, EPS foam, concrete and stone.
It works well in joints that expand or contract more than 25%. Unlike most silicones, CLEAR is rain-ready within 20 minutes, compared to 1-3 hours, and is paintable after 24 hours.
NOTE: We recommend using this product within 6 months of the date of purchase.
NOTE 2: To smooth out Chemlink Clear, use only rubbing alcohol and not water or mineral spirits or anything with xylene.
NOTE 3: ChemLink products do not adhere to polyethylene, HDPE or polypropylene (recycled plastics)
Why We Like It
Applying caulk in cold or damp weather can be a challenge that holds up the whole job. CLEAR is the perfect multi-purpose product that performs better than some silicones with the advantage of being paintable and rain-ready within 20 minutes. Ultra low VOC 14.43 g/l and no odor when dry.
Features & benefits
- Non-toxic — no formaldehyde, ammonia, latex, crystalline silica, ethylene glycol, exempt solvents, aromatic hydrocarbons, isocyanates, and no biocides or fungicides
- Application — will cure when damp, dry or cold as low as 30 °F
- Elastomeric — capable of joint compression and expansion without cracking
- 100% solids content — will not shrink
- Working temperature — performs in temps -40 °F to 200 °F
- Non-slumping — applies vertically and overhead
- Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
- Eco-friendly — ultra low VOC
- No odor — pleasant to use
- Lasting color — does not discolor when exposed to UV lighting
NOTE: Do not use with mineral spirits or xylene, do not use in areas subject to continuous immersion and do not store in hot temperatures. Allow treated wood to cure for six months before applying. Contact tech support for areas subject to chemical exposure.
Specs
Dimensions
Weight per Sale Unit
1.12 lbs
Coverage
25 linear feet with a 1/4" bead
Basics
Interior or Exterior
Exterior,
Interior,
Surface or Product Preparation
Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer
Application Method
Caulk gun
See manufacturers guidelines for each type of surface
See manufacturers guidelines for each type of surface
Application Temperature Range
Warmer than 30°F
Location
All Rooms,
Eco-replacement for
Caulk or Caulking Compound,
Shelf Life
1 Year
Storage
Store in cool dry place out of sunlight
Chemically-sensitive safe
Test before use
Yes, test on inconspicuous area
Certifications
Certifications
- American Subcontractors Association (ASA)
- Associated General Contractors of America (AGC)
- Building Owners and Maintenance Association (BOMA)
- Construction Specifications Institute (CSI)
- Meets or exceeds California Air Resources Board (CARB) requirements
- Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements
- Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements
- Meets or exceeds Californial Proposition 65 requirements
- Meets or exceeds OTC requirements for sealants & caulks
- Meets or exceeds USDA requirements for non-food contact
- Metal Building Contractors/Erectors Association (MBCEA)
- National Association of Home Builders (NAHB)
- National Roofing Contractors Association (NRCA)
- Sealant Waterproofing & Restoration Institute (SWRI)
- Sheet Metal and Air Conditioning National Association (SMACNA)
- U.S. Green Building Council (USGBC) Member
LEED Qualifications
- Indoor Environmental Quality/4.1 Low-Emitting Materials/Adhesives and Sealants: 1 point
Features
Material Origin
United States,
Country of Manufacture
United States,
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations. Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Cleans Up With
Alcohol
VOC Content
14.43 grams/liter
Drying Time
20 minute skin over and paintable in 24 hours
Re-coat After
As needed
Freeze/thaw Safe
Yes
Appearance When Dry
Clear satin
Formaldehyde Emissions
No added urea formaldehyde
Finish
Caulk,
Questions & Answers